Temperature Forcing Systems
Thermal Stream AES-series
Temperature range: -120 °C ~ +300 °C;
The temperature rise and fall is very fast, -55 °C ~ 150 °C < 10 s
Temperature control accuracy: ±1 °C;
Temperature setting capability: ±0.1 °C;
Temperature display capability: ±0.1 °C;
Maximum air flow: 25m³/h;
Test results are repeatable
Because it can stably maintain a certain temperature point during constant temperature testing, the accuracy can reach ±0.1℃; the temperature changes rapidly during temperature shock: -55℃~+150℃<10 seconds; it truly achieves the purpose of temperature “shock”; the temperature change time is controllable and the operation can be programmed.
Compared to the traditional thermostat, there are several features:
Real-time monitoring of the real temperature of the IC under test to achieve closed-loop feedback and adjust the gas temperature in real time;
The temperature rise and fall time is controllable, programmable operation, manual operation and remote control.
Model | AES-4535 | AES-6035 | AES-8035 | AES-A1035W | AES-A1235W | |
AES-4535W | AES-6035W | AES-8035W | ||||
Temp. Range | -45℃~225℃ | -60℃~225℃ | -80℃~225℃ | -100℃~225℃ | -120℃~225℃ | |
Heating Power | 3.5kW | 3.5kW | 3.5kW | 4.5kW | 4.5kW | |
Temp. Control Accuracy | ±0.5℃ | ±0.5℃ | ±0.5℃ | ±0.5℃ | ±0.5℃ | |
Temp. Conversion Time | -25℃ to 150℃ Approximately 10S 150℃ to -25℃ Approximately 20s |
-45℃ to 150℃ Approximately 10S 150℃ to -45℃ Approximately 20s |
-55℃ to 150℃ Approximately 10S 150℃ to -55℃ Approximately 15s |
-70℃ to 150℃ Approximately 10S 150℃ to -70℃ Approximately 20s |
-80℃ to 150℃ Approximately 11S 150℃ to -80℃ Approximately 20s |
|
Air Requirement | Air Cleaner <5um | |||||
Air Oil Content: <0.1ppm | ||||||
Air Temp & Humidity: 5℃~32℃ 0~50%RH | ||||||
Air Handing Capacity | 7m³/h~25m³/h, Pressure 5bar~7.6bar | |||||
System Pressure Display | Pressure of refrigeration system is realized by pressure gauge (High pressure, low pressure); | |||||
Pressure of circulatory system is detected by pressure sensor and displayed on touch screen. | ||||||
Controller | Siemens PLC, Fuzzy PID Control algorithm. | |||||
Temp. Control | Control of outlet temperature | |||||
Programmable | 10 procedures can be developed, and each program can be composed of 45 steps | |||||
Communicating Protocol | Ethernet Interface TCP/IP Protocol. | |||||
Internal Temp. Feedback | Equipment outlet temperature, refrigeration system condensation temperature, ambient temperature, compressor suction temperature, cooling water temperature (for water-cooled equipment). | |||||
Compression Engine | Taikang, France | Taikang, France | Taikang, France | Italy Duling | Italy Duling | |
Refrigerant | R404A | R404A/R23 | R404A/R508B | R404A/R23/R14 | R404A/R23/R14 | |
Shape Dimension (Wind) cm | 54×69×132 | 54×69×132 | 75×73×133 | 80×120×185 | 100×150×185 | |
Cooling Water Quantity At 25℃ | 0.6m³/h | 1.2m³/h | 1.6m³/h | 2.6m³/h | 3m³/h | |
Source 380V 50HZ | 3.7kW max | 5kW max | 5kW max | 6.8kW max | 7.5kW max |

Designed for Thermal Performance and Efficiency
The jet flow high and low temperature impact tester provides precise and rapid ambient temperature for chips, modules, integrated circuit boards, electronic components, etc. It is an indispensable instrument for electrical performance test, failure analysis and reliability evaluation of products.

Suitable for IC testing of all kinds of semiconductor chips,flash memory Flash/EMMC, PCB circuit boards, opticalcommunications,electronic industries, etc.


Customize Your Thermal Test Application
It can isolate one lC or original component among many componentsand separately perform high and low tempimpact withoutaffecting other surrounding devices. Compared with the traditionalthermal shock test box, the temp impact rate is faster.
Product Details
Learn what a thermal forcing system can do for your testing application(Watch the video)

The heating and cooling time is controllable, programmable, and can be operated manually or remotely controlled by software. We have 5 models for you to choose from, and we also provide customized services. Please contact us at support@lneya.com